FLYSKY Noble NB4+ Surface Radio  This product uses the 2.4GHz Third Generation AFHDS 3 protocol. The Noble NB4+ transmitter and FGr4B receiver constatute a system, compatible with model cars, boats and other models. and it also supports the USB simulator function (Default enabled). System...

The RadioMaster MT12 is a pioneering open-source surface radio, and the first surface radio officially supported by EdgeTX, ExpressLRS, and the Multi-module project. Boasting 10 physical inputs and the capability to handle either 16 or 32 channels*, the MT12 is primed for a wide...

Manual OVERVIEW Featuring an ultra-short integrated design with a length of just 48.5 mm, this motor is 9.5 mm shorter than the Pro Standard version and 1.3 mm shorter than the AXE 540. It fits most 10th-scale crawler chassis on the market, allowing for...

Specification   Channel: 2 (Fast)、4、6、8、10、12、18 Optional   Model Type: Car/Boat/Robot   Range: >300m (Ground distance without interference)   Display: 3.5-inch 320*480 full colour IPS high brightness outdoor screen   Language: Chinese/English   Dimensions: 120*144*274mm (length*width*height)   Body weight: 670g (include stand) Noble NB4 Pro+...

Features: The FGr8B receiver is suitable for RC models such as boats and cars.Compatible with all AFHDS 3 transmitters and RF modules including PL18, NB4+, NB4 Pro +, FRM302, etc.It uses a single-antenna bidirectional transmission system and is uniquely designed to install and output...

The RadioMaster ER5C-i receiver is based on the high-performance, revolutionary ExpressLRS system, featuring high reliability, highly flexible configuration, ultra-fast response speeds, and an ultra-long receiving range, bringing with it a brand-new usage experience. The ER5C-i ELRS receiver can drive up to 5 servos and...

OVERVIEW It supports Sensorless Brushless motors & Brushed Motors. Compatible with most brushed or brushless motors on the market. Fully waterproof design for all conditions. Super internal switch-mode BEC with switchable voltage of 6V/7.4V/8.4V for usage with high torque and high voltage servos. Separate programming...

Special Edition Blue RS800 V2 & Matching Monster Horn  Our RS800 V2 is one of the highest performing servos on the market! Our proven hardened stainless steel gears and upgraded 2mm thick main dowel pin and a 1.9mm secondary that have never failed!  Built with...

Manual OVERVIEW Outer brushless motor The system has high efficiency, less heat, and effectively extends the run time; and the motor runs more quietly and soft. Excellent water resistance and dustproof performance, capable of running in various conditions. Intelligent torque output and speed closed-loop...

Special Edition Blue RS800 V2 & Matching Monster Horn  Our RS800 V2 is one of the highest performing servos on the market! Our proven hardened stainless steel gears and upgraded 2mm thick main dowel pin and a 1.9mm secondary that have never failed!  Built with...

FURITEK KOMODO UNITY 10 PRO SENSORED Competition 2000KV The World's First 2-in-1 Outrunner Brushless Motor with Integrated FOC ESC and Sensored Technology for 1/10 RC Crawlers The FURITEK KOMODO UNITY 10 PRO SENSORED Competition is the next generation of the UNITY platform. Built around Furitek's integrated...

MEUS Racing 1.9 Inch MS6 Super Bouncer Soft & Sticky Rubber Tires for 1/10 SCX10 Capra 1.9 UTB TRX4 Redcat Gen8 RC Crawlers. Key Features: 1. Made of super soft & sticky MS6 Orange-Dot compound from MEUS Racing. 2. Aggressive side lug design provides...

Designed with hardened 416 stainless steel gears, and a custom 4 pole brushless motor, the RS650 is the highest performing low profile 8.4v servo on the market. The RS650 is built with the highest quality parts, designed for the performance demands of competition level...

MEUS Racing Soft Silicone Rubber Inserts for 118-122mm 1.9-Inch Tires for 1/10 RC Crawlers. Key Features: 1. Fit with 1.9-inch muddy terrain tires with a diameter of 118-122mm and a width of 42-45mm. 2. Made of high-quality silicone rubber, offering exceptional waterproof and temperature-resistant...

MEUS Racing Aluminum 1.9 Beadlock Wheels for 1/10 TRAXXAS TRX-4, TRX-6, Axial SCX10, SCX10 II, SCX10 III, Redcat GEN7, GEN8 RC Crawler Upgrade Accessories. Key Features: 1. High quality: made of aluminum alloy and brass. Surface chrome plating and anodized treatment. The appearance is...

MEUS Racing Brass+Aluminum 1.9-Inch Beadlock Wheels Supports Front Rear Twin Wheels Adjustable Offset 8 ET Offsets for 1/10 TRAXXAS TRX-4, TRX-6, Axial SCX10, SCX10 II, SCX10 III, Redcat GEN7, GEN8, RC4WD D90 RC Crawler Upgrade Accessories. Key Features 1. High quality: made of aluminum...