HobbyPlus 180 Size Brsuhed Motor

INJORA MBL32 G2 Waterproof Brushless ESC & 1721 Purple Viper Outrunner Motor for 1/18 TRX4M Ascent-18 Compatibility Notice: Transmission:  Compatible with 1/18 TRX4M, 1/18 Redcat Ascent18 transmissions, not compatible with 370 transmission. Features: The INJORA MBL32 G2, based on the AM32 firmware, is meticulously tailored...

Body sizeWheelbase: 106mm Front width: 80mm Rear width: 80mm Body length: 175mm Body thickness: about 0.5mm

The Wing Things are designed to make mounting your wing much easier.  Install the screw from the bottom of the body and thread them into the wing thing threads.  You can hold the wing thing with a 4.5mm hex wrench to fully tighten. The...

They are here! Super high performance, help keep the internal resistance low 6 per bag

Performance That Dominates Powered by a 2852 brushless motor and paired with a 45A ESC (supporting both 2S and 3S LiPo batteries), the 14211 can reach speeds up to 49km/h on 2S and an exhilarating 70km/h on 3S. A factory-included 2S 3000mAh LiPo battery ensures you’re ready to race right out of the box....

Universal Zero Slop axles. get rid of the gap between the inner bearing ID and the OD of the axle. On some cars this clearance can alter your camber by 1-2 degrees   Will fit GL, Atomic,Reflex and many others   Comes with extra...

3-AXIS Gyro system for RC MINI RC car Sensitivity gain function 1.Adjust the gain   value by transmitter’s sensitivity channel, range from -100% ~ 0 ~ + 100%.    a. 0 is no gain at all.    b. -100%/+ 100% is the maximum sensitivity gain....

- SIMULATION OF CAR BODY DESIGN- JK07 Pro restores the appearance of the real car, equipped with a full vehicle linkage lighting system, simulation of side tents, gantries, luggage racks and other designs the ultimate simulation of details, to take you to open the...

- SIMULATION OF CAR BODY DESIGN- JK07 Pro restores the appearance of the real car, equipped with a full vehicle linkage lighting system, simulation of side tents, gantries, luggage racks and other designs the ultimate simulation of details, to take you to open the...

Model:GMM-002-SD5500KV Weight:42.00g

Quick Overview This is the CEN Racing FORD B50 4WD 1/10 Scale Ford RTR Monster Truck. Based on a real truck, this is an officially licensed 1979 Ford F600 crew cab front end with a 1979 Bronco rear bed! The headlights and light bar have...

Differential option for RTB composed of : Anodized 7075-T6 aluminum housing High-quality plastic machined drive cup Ceramic thrust bearing Ceramic diff balls Heat-treated adjusting screw with unique design The differential is delivered disassembled, without spur and spur bearing. Weight 0.04 kg

Adjustable program card for your Reflex Racing MC1 ESC. *Price Includes New Tariff Rates