Browse by Category
-
Sku: IC-DX8
iCharger DX8
- $250.00 USD
USD- $250.00 USD
- Unit price
- per
Manual download : HERE Special Features The DX8 uses advanced Synchronous buck-boost DC/DC converter technology, high power, a high current and high-performance power conversion circuit. The maximum charge power capacity is up to 1600W, the maximum charge/discharge current of a channel is up to...- $250.00 USD
USD- $250.00 USD
- Unit price
- per
-
Sku: IC-S6
iCharger S6
- $130.00 USD
USD- $130.00 USD
- Unit price
- per
This is a Junsi S6 Lilo, LiPo, Life, NiMH, NiCD DC Battery Charger is a palm-sized charger that's packed with an unbelievable 1100W and 40A of power packed into a miniature frame, full of features only seen in advanced chargers.The charger shares the accessible...- $130.00 USD
USD- $130.00 USD
- Unit price
- per
-
Sku: IC-X12
iCharger X12
- $174.99 USD
USD- $174.99 USD
- Unit price
- per
This is a Junsi X12 Lilo, LiPo, Life, NiMH, NiCD DC Battery Charger is a palm-sized charger that's packed with an unbelievable 1100W and 30A of power packed into a miniature frame, full of features only seen in advanced chargers.The charger shares the accessible...- $174.99 USD
USD- $174.99 USD
- Unit price
- per
-
Sku: IC-X6
iCharger X6
- $112.99 USD
USD- $112.99 USD
- Unit price
- per
The Junsi X6 Charger is the latest charger on the market that features an incredible power density never before seen! The X6 boasts a whopping 800W charge capabilities at up to 30A on appropriate input voltages. The balance circuit offers a power 2A circuit,...- $112.99 USD
USD- $112.99 USD
- Unit price
- per
-
Sku: IC-X8
iCharger X8
- $139.99 USD
USD- $139.99 USD
- Unit price
- per
The Junsi iCharger X8 Lilo/LiPo/Life/NiMH/NiCD DC Battery Charger features 8S capabilities and up to 1100W of power and up to 30 Amps of charge current. Features: X8 uses advanced Synchronous buck-boost DC/DC converter technology with high power, high current and high-performance power conversion circuit....- $139.99 USD
USD- $139.99 USD
- Unit price
- per
-
Sku: 4M-09F
INJORA +2mm Thread Extended Stainless Steel Front Axle Shafts For 1/18 TRX4M
- $9.99 USD
USD- $9.99 USD
- Unit price
- per
INJORA Extended 2mm Thread Stainless Steel Front Axle Shafts For 1/18 RC Crawler TRX4M Upgrade Parts (4M-09)Only compatible with: 1/18 TRX4MFeatures: Extended 2mm thread axle shafts to install wider wheel hex Made of hardened stainless steel Rust-proof and durable in use Easy to replace and...- $9.99 USD
USD- $9.99 USD
- Unit price
- per
-
Sku: 4M-09R
INJORA +2mm Thread Extended Stainless Steel Rear Axle Shafts For 1/18 TRX4M
- $7.99 USD
USD- $7.99 USD
- Unit price
- per
INJORA Extended 2mm Thread Stainless Steel Rear Axle Shafts For 1/18 RC Crawler TRX4M Upgrade Parts (4M-09)Only compatible with: 1/18 TRX4MFeatures: Extended 2mm thread axle shafts to install wider wheel hex Made of hardened stainless steel Rust-proof and durable in use Easy to replace and...- $7.99 USD
USD- $7.99 USD
- Unit price
- per
-
Sku: SCX30-25BKFR
INJORA +3mm Planet Axles with Brass Steering Knuckles for 1/30 SCX30
- $52.99 USD
USD- $52.99 USD
- Unit price
- per
INJORA +3mm Planet Axles with Brass Steering Knuckles for 1/30 Axial SCX30 Note: Compatible with both INJORA and stock SCX30 servos, gears, steering knuckles, chassis links. Not compatible with original SCX30 size steering links and dogbone shafts as the axle housings are 3mm extended...- $52.99 USD
USD- $52.99 USD
- Unit price
- per
-
Sku: 4M-92BKFR
INJORA +4mm Diamond Axles With Lay Down Servo Mount & Links For 1/18 TRX4M - BLACK
- $79.99 USD
USD- $79.99 USD
- Unit price
- per
INJORA +4mm Diamond Axles with Lay Down Servo Mount & Links for 1/18 TRX4MNote: Not compatible with stock TRX4M chaissis as the lay lown servo mount is wider than stock. Not compatible with original TRX4M size dogbone shafts as the axle housings are 4mm...- $79.99 USD
USD- $79.99 USD
- Unit price
- per
-
Sku: 4M-92SRFR
INJORA +4mm Diamond Axles With Lay Down Servo Mount & Links For 1/18 TRX4M - SILVER
- $79.99 USD
USD- $79.99 USD
- Unit price
- per
INJORA +4mm Diamond Axles with Lay Down Servo Mount & Links for 1/18 TRX4MNote: Not compatible with stock TRX4M chaissis as the lay lown servo mount is wider than stock. Not compatible with original TRX4M size dogbone shafts as the axle housings are 4mm...- $79.99 USD
USD- $79.99 USD
- Unit price
- per
-
Sku: 4M-117BKFR
INJORA +4mm Planet Axles with Brass Steering Knuckles for 1/18 TRX4M
- $85.99 USD
USD- $85.99 USD
- Unit price
- per
INJORA +4mm Planet Axles with Brass Steering Knuckles for 1/18 TRX4M Note: Not compatible with TRX4M stock chassis as the lay lown servo mount is wider than stock. Not compatible with original TRX4M size dogbone shafts as the axle housings are 4mm extended per...- $85.99 USD
USD- $85.99 USD
- Unit price
- per
-
Sku: SCX24-190BKFR
INJORA +4mm Planet Axles with Double Joint Shafts & Brass Steering Knuckles for 1/24 Axial SCX24
- $79.99 USD
USD- $79.99 USD
- Unit price
- per
INJORA +4mm Planet Axles with Double Joint Shafts & Brass Steering Knuckles for 1/24 Axial SCX24 Note: Only compatible with the SCX24 stock rear link mount and INJORA rear axle truss upper link mount (SCX24-78). Features: Planet-Inspired Axle Design: Planet-shaped differential housing, precisely CNC-machined...- $79.99 USD
USD- $79.99 USD
- Unit price
- per
-
Sku: SCX24-14
INJORA 0.05" 1.27mm Hex Screwdriver Tool for Axial SCX24 AX24 SCX30
- $4.99 USD
USD- $4.99 USD
- Unit price
- per
For Axial SCX24, INJORA 0.05" 1.27mm Hex Screwdriver Tool Suit for 1/24 1/18 RC Crawler Cars: 1/24 RC Crawler Axial SCX24 AX24 1/30 RC Crawler Axial SCX30 Almost all of the INJORA 1.0" wheels Features: Made of high quality alloy steel Non-slip aluminium handle Resistant to...- $4.99 USD
USD- $4.99 USD
- Unit price
- per
-
Sku: T7025
INJORA 0.7" 34*12mm MAVERIX M/T Tires for 1/30 SCX30
- $12.99 USD
USD- $12.99 USD
- Unit price
- per
INJORA 34*12mm 0.7" MAVERIX M/T Tires for 1/30 Axial SCX30 (T7025) Note: Designed and tested exclusively with INJORA wheels. Compatibility with wheels from other manufacturers is not guaranteed due to differences in design and tolerances. Features: Molded in the Super Soft & Sticky INJORA...- $12.99 USD
USD- $12.99 USD
- Unit price
- per
-
Sku: T7014
INJORA 0.7" 35*14mm King Trekker Tires for 1/30 SCX30
- $12.99 USD
USD- $12.99 USD
- Unit price
- per
INJORA 35*14mm 0.7" King Trekker Tires for 1/30 Axial SCX30 (T7014) Note: Designed and tested exclusively with INJORA wheels. Compatibility with wheels from other manufacturers is not guaranteed due to differences in design and tolerances. Features: Molded in the Super Soft &...- $12.99 USD
USD- $12.99 USD
- Unit price
- per
-
Sku: T7019
INJORA 0.7" 36*14mm Swamp Claw Tires for 1/30 SCX30
- $12.99 USD
USD- $12.99 USD
- Unit price
- per
INJORA 36*14mm 0.7" Swamp Claw Tires for 1/30 Axial SCX30 (T7019) Note: Designed and tested exclusively with INJORA 0.7" wheels! Compatibility with wheels from other manufacturers is not guaranteed due to differences in design and tolerances. Features: Molded in the Super Soft & Sticky INJORA...- $12.99 USD
USD- $12.99 USD
- Unit price
- per
