1000 results found for “FMS Rochobby”

All new from Reflex Racing is our True Spec 460mah battery.  This battery has the same footprint as our 400mah 8.7V LiHv battery, but it is slightly taller at 13.0mm vs 12.3mm.  The result is increased capacity and much lower Internal Resistance (approximately 30%...

Reeper Clear Body (With Window and Red Decal sheet).

What's Included: Front Tires w/foam insert Premounted x 2 Rear Tires w/foam inserts Premounted x 2 PULSE 340mah 2S 7.6V 60C LiHV Hardcase Battery

Description:For MJX 14209, 14210 RC CarPackage Included:1x set

What's Included: Front Camper Link x 2 Steering Link x 2 Rear Camber Link x 2

Description:For MJX 14209 RC CarPackage Included:1x set

When the terrain gets rough and ordinary shells won’t cut it — the Radianz “Rockbeast” body steps up. Designed for the Losi LMT18 / Magalodon chassis, this shell fuses rugged off‑road attitude with tough, race‑ready construction. It doesn’t just cover your build — it...

INJORA 0.7" D19 ModuWheel Wheels for 1/30 SCX30 (MW7012) Note: Designed and tested for use with INJORA 0.7" tires Compatibility with tires from other brands may vary due to differences in bead design and tolerances Features: CNC-machined brass and aluminum construction Replaceable wheel faces...

1.The material and look:this is a servo mount made of aluminum for better strength and durability; red, silver, black anodized, very bright colors and beautiful appearance;  2.Machining:this is a CNC machined piece with accurate data,each of its parts fits perfectly; 3.Replace stock plastic parts...

This Kit version included: 1. GLF1 Chassis 2. Metal gears servo with saver   Items you will need to run: 1. Transmitter 2. Receiver 3. Electronic speed controller 4. 15mm brushless Motor (e.g. GL and XP motors) 5. 2S LiPo battery (47x11x20mm JST-PH plug)...

Description : - Use for CR18P EVO  - 4pcs x Complete Shocks Set (Black)

Supra-X 2 Color Single Square Holder 6mm For Battery (8M,8F)

Spare Part Number: XTS-079 Item Name:Car Body Color:White Material:1.2 MM PC Quantity: 1 pieces Apply to XTS-F10 RC Rally Car Note: Lighting components are not included Decorative components not included

Note: Furitek ESC only support: Komodo 2204 1400kv, Micro Komodo 3450kv, Mini Komodo 2000kv. Don't run motors with high KV like 4100 on 3S

Description: 1. Made of high quality metal with high strength 2. Cross-knot structure allows for greater steering and stronger torque. 3. When installing, use the equipped bearings to replace the steering knuckle bearings. 4. Suitable for SCX24 MEUS Plastic Portal Axle and Aluminum Portal...

Features: 1.Made of steel,CNC hardened steel structure，sturdy and durable. 2.There are lengths in total, 3 combinations:Type A: for SCX24 Deadbolt AXI90081 ，B17 AXI00004. Type B:for SCX24 C10 AXI00001 AXI00002, JLU,Ford Bronco AXI00006.Type C:for SCX24 Gladiator AXI00005.Size and weight：A: 34-40MM+56-81MM；20GB: 45-58MM+56-81MM；21G C: 45-58MM+69-95MM；23GThe package includes:2*drive...

XB-F1 Plastic Bumper The XB-F1 plastic bumper has been designed to comply with the 2026 PN Racing rules.This bumper has a total width of 82mm. To install it, the sides of the original front Lexan wing must be trimmed.

Halterung Batterie/Fernsteuerung GST-E.

The Xbility King Pin Set provides four camber options for the XB-SF Front, allowing quick and precise front suspension setup adjustments. The kit includes matched pairs of king pins for 0°, 1°, 1.5° and 2° camber, making it easy to fine-tune the front end...

PULSE 350mah 2S 7.4V 30C LiPo Battery - PH2.0 Connector   HobbyPlus Premounted Front / Rear Tires (Yellow) - Speck B

NX300-B-Specter’s Description and Unique Characteristics: Width: 69mm (W) Wheelbase: 98-102 mm Weight: ~86.3g (Kit only) Brass chassis : 38.5 g Battery Compatible: 22 x 46 x 13.7 mm (2S – 7.4V Lipo Battery) Micro Servo Compatible: 24-24.4mm x 7-11.5mm x 10.5-13.7mm Specter is 100%...

Features Improved top speed / Precision response / High efficiency with the cool operation When used with the EzRun Mini28 ESC, timing advance can be used to increase top speeds drastically. Zero cogging, consistent torque, and excellent low-speed response give an amazing feel and...

INJORA MBL32 G2 Waterproof Micro Brushless ESC for 1/24 1/18 RC Crawlers TRX4M Ascent18 SCX24 Programming Tutorial  Compatible with:  INJORA 1721 Purple Viper motors INJORA 2204 Fat Viper motors Features: The INJORA MBL32 G2, based on the AM32 firmware, is meticulously tailored for Micro...

AWD series is a Four Wheel Drive chassis with Drift tires and paired with the Syncro KT-531P Transmitter. Perfect for drifting in small spaces.   To bring its dynamic performance to even more drivers, the MINI-Z AWD is now available in a Readyset. The...

INJORA Stainless Steel High Clearance Chassis 4 Links Set For 1/24 Axial SCX24 GX470 UpgradeCompatible with: 1/24 Axial SCX24 GX470Features: Plastic rod ends, brass pivot balls High Clearance Links eliminate axle wrap and unwanted axle steer, and it has higher clearance in climbing Replace...

Descriptions :   Carbon-fiber upper deck to upgrade Material Features : upgrade Material CNC ALU 7075 T6, smooth surface, durable and beautiful appearance Carbon-fiber 3mm Specifications:Material: Aluminum, Carbon-fiberColor: Red / BlackPackage List:2* Carbon-fiber plate 1* front center piece 1* middle center piece 1* rear center piece 12* button M3x6

  Motor Specifications: Motor Type: Sensored Waterproof Motor Kv: 5600  Watt: 300W Battery: 2-3S Resistance: 0.035ohm Max Current: 30A Slot/Pole: 12 slot/4 pole  Motor size: 24*35mm Shaft: 2.3*12mm Weight: 54g Motor Features: Sensored 4 Pole hi-torque motor design. High purity and higher temperature single...

The MLS and TCM TORQ servo series feature replaceable gear sets designed to ensure durability and cost-effectiveness. These gear sets are made from high-strength steel, allowing users to swap out damaged gears instead of replacing the entire servo. This design is particularly useful after...

C66 DriftCar Features C66 DriftCar 1. Ballast: Equipped with additional ballast weights (four blocks: front, rear, left,right)toenhancevehiclestabilityandresponsiveness.2. Gyroscope: Upgraded from the standard unit to suit this vehicle's weight andspeed characteristics, enabling superior drift angles. Gyrosensitivity increasesproportionallywithvehiclespeed.3. Motor: Speed:5km/h.MotorSpeed:51,000RPM.4. Throttle Curve: Refined throttle response through upgrades...

Features:1. These upgrades are made of high-quality brass,CNC machined,exquisite and durable;2. Brass material increases weight and improves vehicle performance,keep the balance of the car body;3. Direct replacement for stock plastic parts;4. Suit For 1/18 RC Crawler Axial UTB18 Capra upgrade parts.Material: Brass

Descriptions :   Carbon-fiber upper deck to upgrade Material Features : upgrade Material CNC ALU 7075 T6, smooth surface, durable and beautiful appearance Carbon-fiber 3mm Specifications:Material: Aluminum, Carbon-fiberColor: Red / BlackPackage List:2* Carbon-fiber plate 1* front center piece 1* middle center piece 1* rear center piece 12* button M3x6

Features: 1. Made of high quality steel to increase wear resistance and extend service life;  2.Precision CNC machined steel structure, stable and durable;  3.Perfectly match the original gearbox, easy to install; 4. Reduction ratios: 13.17:1(overdrive 26%) 5.Motor Gear:11T 6.Package includes: gear*4; 3×6× 2.5 bearing*6; 3×16...

Manual:XB1-097 SLIPPER SPOOL FOR XB1 Adjustable Slipper Spool This solid axle spool features an adjustable spur gear slipper system, allowing fine tuning of how much rotation you want from the rear end. By adjusting the slipper, you can control the car’s behavior on power,...

TORQ CNC Servo horn M2.5 25T

Description: For MJX 16207 16208 16209 16210  RC Car. Meterial: plastic Package Included: 1x set

Description : - Use for CR18P EVO/ JUICE UP - 1 set x Gear Box

1/10 SCX10 III 1987 Toyota SR5 4X4 RTR Brushed Rock Crawler, Tan Overview The fan-favorite Toyota SR5 is an iconic pickup that has conquered every legendary off-road destination out there. As popular as any crawling capable vehicle, SR5 pickups can be found making quick work...

Losi 1/24 Micro-B 2WD Buggy RTR Overview Losi introduced its first RC micro vehicle nearly two decades ago. It was easy on the wallet and small enough to carry in a coat pocket. The low cost and convenience — combined with exciting, hobby-quality performance...

REDCAT VERTEX-10W SLIDER CRAWLER The Redcat Vertex-10W Slider features an extended-width stance for increased stability and confidence on challenging terrain, Equipped with high-clearance portal axles, carbon fiber components, and precision steering and lightweight body it's built to conquer tough terrain with confidence and style.  PERFORMANCE...

#9602 - MIP Hex Driver Wrench Set Gen 2, Metric (3), 1.5mm, 2.0mm, & 2.5mm MIP Gen 2 Tools: Same Iconic Look, Amplified Awesomeness! For over 30 years, MIP tools have been the go-to gear for RC enthusiasts who demand the best. The iconic...

Description:For MJX 14210 RC CarPackage Included:1x set

Only compatible with: Furitek FX118 Fury Wagon and FX118 KatanaFeatures: Made of brass material Replace the stock plastic parts directly 1.62oz/4pcs (46g/4pcs) Package List:4* Brass wheel hex

REFLEX RACING RX28 BRASS MAIN CHASSIS RX28-013

Only compatible with: Furitek FX118 Features: Made of brass + Aluminium material Replace the stock plastic parts directly Weight: 2.05oz/4pcs (58g/4pcs) Package List:2* Brass Rear 2 * Brass Front 2* Aluminium Front Hub

Description: For MJX 16207 16208 16209 16210  RC Car. Meterial: plastic Package Included: 1x set

Clear F1 body shell including all parts.

What's Included: Rear .93mm Sway Bar x 1 Rear .72mm Sway Bar x 1 Front .93mm Say Bar x 1 Front .72mm Sway Bar x 1 Plastic Ends x 4 Hardware x 14  What it Fits: 1/24 Speck B 1/24 Speck SCT 1/24 Speck-T...

MEUS Racing Stainless Steel High Clearance Chassis Links & Steering Links For 1/18 Redcat Ascent-18 RC Crawler. Key Features: The link rods are made of 304 stainless steel for durability.Bent links have higher clearance in climbing. Plastic rod ends and brass pivot balls ensure...

Description : - Use for CR18P-EVO/ EVO PRO - Front CVD Drive Shaft