FURITEK · TRI-UNITY30 FULLRANGE DRIVE™ SERIES

Next-Gen FOC Drivetrain for Axial SCX30

Ultra-Slow Control. Full-Range Performance. Two Tunes. One Drivetrain.

One Drivetrain. Two Driving Styles.

The FURITEK TRI-UNITY30 FULLRANGE DRIVE™ introduces a new drivetrain architecture for the Axial SCX30, combining a brushless motor, conventional geared transmission, and advanced Furitek FOC ESC into one ultra-compact assembly.

By replacing the traditional center worm-based transmission approach, TRI-UNITY30 opens up a wider usable speed range. Furitek FOC control delivers precise ultra-slow crawling, while the new geared layout allows higher wheel speed when the terrain calls for it.

Choose between two performance tunes:

• STANDARD: Prioritizes higher wheel speed while maintaining precise ultra-slow FOC crawling. Ideal for drivers who want more speed and momentum on the trail.

• TORQUE: Prioritizes stronger low-speed pulling power while maintaining full-range performance. Ideal for technical crawling, steep climbs, and heavier builds.

Both versions share the same integrated drivetrain architecture, 2S–3S battery support, built-in WiFi, and FuriCar App wireless tuning.

The integrated layout also places the motor and ESC low in the chassis, helping lower the vehicle's center of gravity and freeing up valuable chassis space.

Choose Your TRI-UNITY30 Version

All four versions use the TRI-UNITY30 integrated motor, transmission, and FOC ESC architecture. The main differences are the performance tune and whether the required FUR-2843 Aluminum Skid Plate is included.

Which Version Should You Choose?

TRI-UNITY30 STANDARD – Higher Wheel Speed

• Higher top speed than the TORQUE version.

• Precise ultra-slow FOC crawling.

• Smooth acceleration and natural throttle response.

• Ideal for drivers who want more wheel speed and momentum.

TRI-UNITY30 TORQUE – Stronger Low-Speed Pull

• Tuned for stronger pulling power at crawling speed.

• Excellent for steep climbs, loaded ledges, and technical terrain.

• Supports both 2S and 3S LiPo.

• Reaches up to 3× the top speed of a stock SCX30.

• Slightly lower top speed than the STANDARD version.

Both versions deliver a wide usable speed range, from ultra-slow crawling to faster trail driving.

FULLRANGE DRIVE™ Technology

01 / NEW TRANSMISSION

Change the Drivetrain. Expand the Range.

TRI-UNITY30 replaces the traditional SCX30 center worm-based transmission with a conventional geared transmission.

The new layout transfers power from the motor to both axles while allowing significantly higher wheel speed.

This redesign specifically changes the center drivetrain. It does not replace the axle internals.

02 / FURITEK FOC CONTROL

Ultra-Slow Precision. Smooth Acceleration.

FOC, or Field-Oriented Control, manages the brushless motor's torque-producing current to deliver smooth and precise operation.

The transmission provides mechanical reduction and torque multiplication, while FOC provides the fine motor control needed for ultra-slow crawling.

Ease into the throttle for careful tire placement, accelerate smoothly between obstacles, and use higher wheel speed when the terrain requires momentum.

03 / LOW AND COMPACT

Bring the Drivetrain Mass Down.

The motor, transmission, and ESC form one ultra-compact assembly, with the ESC integrated into the transmission package.

This brings electronics mass lower into the drivetrain area and removes the need for a separate ESC mounting position higher in the chassis.

The lower component placement helps reduce the vehicle's center of gravity, improving stability on steep climbs, side slopes, and uneven obstacles.

Compact integration also leaves more room for battery placement and chassis layout.

The final vehicle balance depends on the complete build, including the battery, chassis, wheels, and axles.

04 / SELECTABLE WEIGHT BIAS

Choose Front or Rear Weight Distribution.

The motor and ESC sit on the same side of the drivetrain assembly.

Depending on the supported drivetrain orientation, you can position their combined mass toward the front or rear.

• Forward orientation: Can help keep the front axle loaded during climbing.

• Rearward orientation: Offers another option for balancing the vehicle around battery placement, terrain, and driving preference.

Low component placement controls mass height, while drivetrain orientation adjusts front-to-rear weight distribution.

05 / WIRELESS SETUP

Make It Drive Your Way.

A built-in WiFi module connects to the FuriCar App for supported ESC adjustments.

Tune the system for your terrain and driving style without requiring a separate programming module.

STANDARD vs. TORQUE Performance

TRI-UNITY30 STANDARD

Higher Top Speed. Precise Crawling.

The STANDARD version prioritizes higher wheel speed while retaining Furitek FOC's ultra-low-speed control.

Its wider usable speed range allows drivers to move from careful technical crawling to faster trail driving with smooth throttle response.

Choose STANDARD if you want more wheel speed and momentum while maintaining precise crawling performance.

TRI-UNITY30 TORQUE

More Pull Down Low. Still Full Range.

The TORQUE version is tuned for stronger pulling power at low speed.

On 2S or 3S, it delivers strong, smooth traction for steep climbs, loaded ledges, and technical obstacles.

Although its top speed is slightly lower than the STANDARD version, TORQUE still reaches up to 3× the top speed of a stock SCX30.

Furitek FOC control and the conventional geared transmission provide smooth, quiet operation across the throttle range.

Choose TORQUE if low-speed pulling power and controlled climbing performance are your priorities.

Aluminum Skid Plate – FUR-2843

Required for All TRI-UNITY30 Installations.

TRI-UNITY30 cannot be installed or used with the stock Axial SCX30 skid plate.

The FUR-2843 Aluminum Skid Plate is designed specifically for installing the TRI-UNITY30 FULLRANGE DRIVE™ on the Axial SCX30.

It provides the dedicated mounting solution required for the integrated drivetrain.

Choose Your Package

FUR-2844 STANDARD 

The FUR-2843 Aluminum Skid Plate is required and sold separately.

FUR-2845 STANDARD with Alu Skid / FUR-2877 TORQUE with Alu Skid

The required FUR-2843 Aluminum Skid Plate is included.

Already Own the FUR-2843?

Choose the drivetrain-only version without the skid plate.

Buying the Complete Package?

Choose the version with Alu Skid to receive the required mounting plate together with your drivetrain.

What's Included

FUR-2844 – TRI-UNITY30 STANDARD

• 1 × FURITEK TRI-UNITY30 FULLRANGE DRIVE™ assembly

• Integrated brushless motor

• Conventional geared transmission

• Furitek FOC ESC

• Built-in WiFi module

• 1 × User Manual

FUR-2843 Aluminum Skid Plate is NOT included.

FUR-2845 – TRI-UNITY30 STANDARD with Alu Skid

• 1 × FURITEK TRI-UNITY30 FULLRANGE DRIVE™ assembly

• Integrated brushless motor

• Conventional geared transmission

• Furitek FOC ESC

• Built-in WiFi module

• 1 × FUR-2843 FURITEK Aluminum Skid Plate for TRI-UNITY30 SCX30

• 1 × User Manual

FUR-2843 Aluminum Skid Plate is included.

FUR-2877 – TRI-UNITY30 TORQUE with Alu Skid

• 1 × FURITEK TRI-UNITY30 FULLRANGE DRIVE™ TORQUE assembly

• Integrated brushless motor

• Conventional geared transmission

• Furitek FOC ESC

• Built-in WiFi module

• 1 × Servo-to-JST receiver adapter cable

• 1 × FUR-2843 FURITEK Aluminum Skid Plate for TRI-UNITY30 SCX30

• 1 × User Manual

FUR-2843 Aluminum Skid Plate is included.

FUR-2843 – Aluminum Skid Plate Only

• 1 × FUR-2843 FURITEK Aluminum Skid Plate for TRI-UNITY30 SCX30

TRI-UNITY30 drivetrain is NOT included.

Technical Specifications

Skid Plate SKU and MSRP

Required Equipment

• Compatible transmitter and receiver system. See the recommended options below.

• Compatible 2S–3S LiPo battery with a 2-pin JST-PH 2.0 connector or suitable power adapter.

• Mobile device with the FuriCar App for wireless tuning.

Recommended for ages 14+. Hobby-grade RC product, not a toy.

Compatibility and Installation

Important Frame Fitment Notice

When installing TRI-UNITY30 in the stock Axial SCX30 frame, minor trimming of the center frame area is required to provide proper clearance.

For a direct installation without frame trimming, use the FUR-2783 FURITEK MANTIS LCG Competition Chassis Kit for SCX30, available separately.

Compatibility with third-party and aftermarket frames has not yet been verified.

Please carefully review your chassis layout, dimensions, and installation requirements before purchasing. Additional modifications may be required depending on the frame.

Compatibility Details

• Target platform: Axial SCX30, 1/30 scale.

• FUR-2844: STANDARD drivetrain; FUR-2843 required and sold separately.

• FUR-2845: STANDARD drivetrain; FUR-2843 included.

• FUR-2877: TORQUE drivetrain; FUR-2843 included.

• FUR-2843: Aluminum skid plate only; drivetrain sold separately.

• Stock Axial SCX30 skid: NOT compatible.

• Orientation: Front-facing or rear-facing installation depends on skid mounting, chassis clearance, and driveshaft fitment.

• Power: 2S–3S LiPo with a 2-pin JST-PH 2.0 battery connector.

Fitment with the stock SCX30 transmission or other drivetrain systems is not confirmed. Check chassis clearance, mounting alignment, and driveshaft engagement for your chosen drivetrain orientation before operation.

Recommended Transmitter & Receiver Options

Choose a complete transmitter and receiver combo, or select a receiver to match the transmitter you already own.

The following radio products are sold separately from the TRI-UNITY30 FULLRANGE DRIVE™ system.

Buying a New TX/RX System?

FURITEK GRIPOR V2 4CH TX/RX System

A compact 4-channel transmitter and receiver system for micro and mini RC builds.

Furitek MicroFlex PRO 4WS TX/RX Combo

A transmitter and receiver combo for drivers who want four-wheel steering control for their crawler build.

Keeping Your Stock SCX30 Transmitter?

Furitek Micro SLT2 Receiver

Pair your stock Axial SCX30 SLT2 transmitter with the Furitek Micro SLT2 Receiver.

This receiver is for use with compatible Furitek ESCs only and requires a one-time bind to your transmitter.

Transmitter sold separately.

Already Using a Flysky FS-GT5?

Furitek Nano GT5 Receiver

A compact 4-channel receiver designed for SCX24 and SCX30 builds.

It works with Furitek ESC systems and requires a one-time bind to your Flysky FS-GT5 transmitter.

Flysky FS-GT5 transmitter sold separately.

Compare FURITEK SCX30 Brushless Systems

Choose the system that fits your driving style, power requirements, and installation space.

Prices are MSRP in USD.

NANO CORE 30 Series: An Easy Start in Brushless

Choose CORE for value and simple setup.

Both versions use the VENOM30 1212 motor platform, a plastic ESC housing, full FuriCar App support, 2S-only operation, and a 5V / 3A BEC.

Select NANO CORE 30 for crawling or NANO CORE 30 SPEED for more wheel speed.

NanoModo Series: Advanced Performance

Choose NanoModo for a smaller, lighter motor platform, smoother and more precise control, and a CNC aluminum ESC housing.

Both versions support 2S–3S batteries and include a 5A BEC with selectable 5.5V or 7.4V output.

NanoModo uses the Nano Komodo 1205 motor, while NanoModo SPEED uses the Nano Komodo SPEED motor for higher wheel speed.

NANO UNITY Series: Compact 2-in-1 Integration

Choose NANO UNITY to integrate the ESC and motor into one compact unit, reduce wiring, and free up chassis space.

Both versions include full FuriCar App support and a 5.5V / 5A BEC.

NANO UNITY TORQUE supports 2S–3S and prioritizes crawling torque.

NANO UNITY SPEED supports 2S only and prioritizes higher wheel speed.

TRI-UNITY30 Series: 3-in-1 FULLRANGE DRIVE™

Choose TRI-UNITY30 for a complete drivetrain redesign that combines a brushless motor, conventional geared transmission, and Furitek FOC ESC.

Both STANDARD and TORQUE offer ultra-slow FOC crawling and a wide usable speed range.

• STANDARD: Higher top speed for drivers who prioritize wheel speed and trail momentum.

• TORQUE: Stronger low-speed pulling power for technical crawling and steep climbs, with up to 3× the top speed of a stock SCX30.

Choose the version with Alu Skid if you need the required FUR-2843 mounting plate included.

Final Product Selection

FUR-2844

TRI-UNITY30 FULLRANGE DRIVE™ STANDARD

$139.99 USD

Higher top speed with ultra-slow FOC crawling.

FUR-2843 aluminum skid sold separately.

FUR-2845

TRI-UNITY30 FULLRANGE DRIVE™ STANDARD with Alu Skid

$149.99 USD

STANDARD drivetrain with the required FUR-2843 aluminum skid included.

FUR-2877

TRI-UNITY30 FULLRANGE DRIVE™ TORQUE with Alu Skid

$149.99 USD

TORQUE drivetrain with the required FUR-2843 aluminum skid included.

FUR-2843

FURITEK Aluminum Skid Plate for TRI-UNITY30 SCX30

Required mounting solution for all TRI-UNITY30 installations. Sold separately when purchasing a drivetrain-only version.

ULTRA-SLOW CONTROL. FULL-RANGE PERFORMANCE. TWO TUNES. ONE DRIVETRAIN.

Furitek FOC precision. A conventional geared transmission. Compact 3-in-1 integration with a low-mounted drivetrain.

Choose STANDARD for higher wheel speed or TORQUE for stronger low-speed pulling power.

Build your SCX30 around the performance you want.