FURITEK MANTIS LCG COMPETITION CHASSIS KIT FOR SCX30 - TITANIUM EDITION
FURITEK · FUR-2858 · AXIAL SCX30 · TITANIUM EDITION MANTIS LCGCOMPETITION CHASSIS KIT For Axial SCX30 · ...
SKU:
FUR-2858
Availability:
Pre-Order
- $49.99 USD
USD- $49.99 USD
- Unit price
- per
<p>Earn%20[points_amount]%20when%20completing%20this%20purchase.</p>
FURITEK · FUR-2858 · AXIAL SCX30 · TITANIUM EDITION
MANTIS LCG
COMPETITION CHASSIS KIT
For Axial SCX30 · Titanium Edition
More Shock Positions. More Flex. More Grip.
The Titanium Edition takes the MANTIS LCG competition layout and adds significantly more shock mounting positions than the standard MANTIS. More ways to place your shocks means more ways to unlock articulation, so your SCX30 can flex further, keep its tires on the ground, and claw through lines a stiffer setup would bounce off.
NEW vs. STANDARD MANTIS
Extra shock mounting holes for a much more flexible suspension setup
More Shock Holes
Much more flex than standard MANTIS
Ultra-Low CG
Competition-focused layout
15° Angled Skid
Improved breakover clearance
1 mm Titanium
Light, rigid, premium finish
Built for builders who tune their suspension.
The FURITEK MANTIS LCG Competition Chassis Kit, Titanium Edition gives the Axial SCX30 a lightweight, rigid titanium foundation for serious technical crawling. It keeps everything that made the original MANTIS work: ultra-low center of gravity geometry, a 15° angled skid, aluminum shock mounts, flexible body mounting and integrated rock sliders.
What sets this edition apart is suspension freedom. Additional shock mounting holes give you far more choice in where your shocks sit, so you can open up articulation, soften the chassis' reaction to terrain, and build an SCX30 that flexes much more than one on the standard MANTIS.
WHAT'S NEW IN THE TITANIUM EDITION
More Shock Mounting Holes. Much More Flex.
Compared with the standard MANTIS LCG, the Titanium Edition adds more shock mounting positions to the chassis. Shock placement is one of the biggest factors in how a crawler articulates, and more holes means you are no longer locked into a single compromise setup.
Lay the shocks down or stand them up, move them inboard or outboard, and find the position that lets the axles droop and stuff freely. The result is a chassis that lets your SCX30 flex significantly more, keeping all four tires loaded and in contact with the rock instead of lifting a wheel and losing traction.
More articulation
Shock positions that free up axle travel so the suspension can work through uneven terrain.
More tire contact
A flexier chassis keeps tires planted on off-camber lines, side hills and broken rock.
More tuning options
Dial the setup for comp courses, trail driving, or your own shock and spring combination.
Titanium Edition vs. Standard MANTIS
| Feature | Standard MANTIS LCG | Titanium Edition |
|---|---|---|
| Shock mounting holes | Standard positions | More positions |
| Suspension flex | Competition baseline | Significantly more flex |
| Chassis finish | Titanium | Titanium |
| LCG geometry / 15° skid | Yes | Yes |
| Aluminum shock mounts, rock sliders, magnetic body mounting | Yes | Yes |
Key Features
01 / NEW IN EDITION
Expanded Shock Mounting Holes
More shock positions than the standard MANTIS for a far more flexible, articulating suspension setup.
02 / TITANIUM
Premium Titanium Finish
finished titanium rails give custom SCX30 builds a distinctive look while keeping titanium's light weight and rigidity.
03 / MANTIS LCG
Ultra-Low Center of Gravity
Competition LCG geometry keeps mass close to the terrain for stability on steep climbs, side hills and technical lines.
04 / MANTIS LCG
15° Angled Skid Geometry
Improves breakover clearance so the chassis slides over ledges and steep transitions instead of hanging up.
05 / MANTIS LCG
1 mm Precision-Cut Titanium Rails
A strong, rigid competition foundation without unnecessary upper weight.
06 / MANTIS LCG
Aluminum Shock Mount System
Lightweight, rigid aluminum mounts work with the expanded hole pattern to give you a versatile tuning platform.
07 / MANTIS LCG
Flexible Body Mounting
Integrated magnetic mounting for quick body removal, with traditional mounting still available for custom builds.
08 / MANTIS LCG
Integrated Rock Sliders
Side protection that helps the chassis slide through demanding technical obstacles.
09 / MANTIS LCG
TRI-UNITY30 Ready
Provides the center clearance for TRI-UNITY30 FULLRANGE DRIVE™ without chassis frame trimming.
Low CG and Flex, Working Together
A low center of gravity keeps the crawler stable; suspension flex keeps it connected to the terrain. The helps the chassis clear ledges and transitions, and the expanded shock mounting positions let the axles follow the rock.
On off-camber climbs and broken lines, that combination means fewer lifted tires, less tippy behavior and more forward bite when you need it most.
Wide SCX30 Compatibility
The MANTIS LCG chassis supports a wide range of Axial SCX30 platforms, from stock vehicle upgrades to custom body builds and fully customized competition crawlers.
SCX30 Toyota TacomaSCX30 Jeep CJ-7SCX30 Jeep WranglerSCX30 Chevrolet K10SCX30 Ford BroncoCustom SCX30 Builder Kits
Body mounting and component clearance may vary by vehicle model and custom configuration. Some fitting adjustments may be required.
Ready for Furitek Brushless Upgrades
The MANTIS LCG chassis is an excellent platform for modern SCX30 brushless drivetrain upgrades.
Paired with the FURITEK TRI-UNITY30 FULLRANGE DRIVE™, the MANTIS provides the necessary center clearance without chassis frame trimming. Its open layout also gives you room to optimize electronics placement, battery position and front-to-rear weight distribution, and the extra shock positions let you match the suspension to your new drivetrain setup.
What's Included
- Titanium 1 mm precision-cut chassis rails with expanded shock mounting holes
- Aluminum shock mount system
- Integrated magnetic body mounting system
- Rock sliders
Required Equipment
This is a chassis kit only. Body, drivetrain, electronics, axles, suspension components, wheels, tires and battery are not included unless otherwise specified.
Recommended for ages 14+. Hobby-grade RC product, not a toy.
Technical Specifications
| Product Code / SKU | FUR-2858 |
|---|---|
| Product Series | FURITEK MANTIS LCG |
| Edition | Titanium |
| Vehicle Scale | 1/30 |
| Platform | Axial SCX30 and compatible custom builds |
| Chassis Type | LCG competition chassis |
| Chassis Material | 1 mm titanium |
| Chassis Finish | Titanium |
| Shock Mounting Holes | Expanded: more positions than standard MANTIS for increased flex |
| Skid Angle | 15° |
| Shock Mounts | Aluminum |
| Body Mounting | Magnetic and traditional mounting support |
| Rock Sliders | Included |
| TRI-UNITY30 Fitment | Compatible; no chassis frame trimming required |
Recommended Upgrades & Tools
Complete your MANTIS LCG build with these Furitek parts, sold separately.
FUR-2844 - FURITEK TRI-UNITY30 FULLRANGE DRIVE™
Next-gen FOC brushless drivetrain. Fits the MANTIS without chassis frame trimming.
FUR-2845 - TRI-UNITY30 FULLRANGE DRIVE™ with Alu Skid
TRI-UNITY30 drivetrain package with aluminum skid plate included.
FUR-2781 - FURITEK Aluminium Oil Shock 25mm for SCX30
25 mm aluminum oil-filled shocks to make the most of the expanded shock mounting positions.
FUR-2777 - FURITEK PITBOX Micro Tool Kit for SCX30
Compact tool kit for chassis assembly, shock repositioning and field adjustments.
Lower CG. More Shock Positions. More Flex.
FUR-2858 FURITEK MANTIS LCG Titanium Edition. A lightweight titanium competition chassis with expanded shock mounting for SCX30 builds that flex further and grip harder.
| Vendor: | Furitek |
| SKU: | FUR-2858 |
| Availability: | Pre-Order |
| Product Type: | Car Parts |
| Weight: | 0.06 lb |
- Choosing a selection results in a full page refresh.