TREAL Hardware for TRX4M Brass Extended Wheel Hubs (10P-Set) These hardware are selling special for Treal TRX4M Brass Extended Wheel Hubs. (7mm*10mm)X003K9PC4DX003K9N23B  You will receive:-wheel nuts (10)pcs,-Hub Pins (10)pcs-Washers (10)pcs

INJORA +4mm Diamond Axles with Lay Down Servo Mount & Links for 1/18 TRX4MNote: Not compatible with stock TRX4M chaissis as the lay lown servo mount is wider than stock. Not compatible with original TRX4M size dogbone shafts as the axle housings are 4mm...

INJORA IR40 Half Truck Hard Plastic Body with Cage for 1/18 TRX4M Defender BroncoNote: Only compatible with stock TRX4M Defender & Bronco rails Compatible with INJORA 1.3" wheels and 70mm tires. Not compatible with TRX4M High Trail K10/F150 unless you shorten the rails! Features: Unassembled...

Features:1.The high clearance chassis links are CNC machined, aluminum anodized finish；And the drive shaft are made of steel,CNC hardened steel structure，sturdy and durable;2.The bending links eliminate axle wrap and unwanted axle steer, and it has higher clearance in climbing;3.Installation instructions: Triangular - front upper...

Note: Furitek ESC only support: Komodo 2204 1400kv, Micro Komodo 3450kv, Mini Komodo 2000kv. Don't run motors with high KV like 4100 on 3S

FURITEK PYTHON X TEAM SPEC 80A/120A BRUSHED/BRUSHLESS ESC FOR 1/10 RC CRAWLERS WITH BLUETOOTHFURITEK team in the past 3 years have been designed and produced several brushless ESCs for mini crawlers with the famous LIZARD line of ESCs and the new top-of-the-line Python line...

Only compatible with: Furitek FX118 Features: Made of brass + Aluminium material Replace the stock plastic parts directly Weight: 2.05oz/4pcs (58g/4pcs) Package List:2* Brass Rear 2 * Brass Front 2* Aluminium Front Hub

Only compatible with: Furitek FX118 Fury Wagon and FX118 Katana

1.The material and look:made of aluminum,red, silver, black anodized, very bright colors and beautiful appearance; 2.Machining:this is a CNC machined piece with accurate data and you can notice, each of its parts fits perfectly;  3.Replace the stock plastic parts, more robust and durable;  4.Suitable...

1.Carbon fiber material, light weight,lcg chassis frame can reduce the possibility of vehicle rollover when climbing; 2.Increase more shock mounting holes, can be adjusted according to the needs of the installation； 3.The unique design of the bottom 8° inclination angle improves the passability of...

Features: 1.Servo mount is made of aluminum,CNC machined and anodized,exquisite and durable; 2.Equipped with 2 stainless steel steering links; 3.Place the servo horizontally,give a lower center of gravity for your TRX-4m； 4.Not applicable to original frame； 5.The original axle link mount needs to be...

Features: 1. Made of high quality steel to increase wear resistance and extend service life;  2.Precision CNC machined steel structure, stable and durable;  3.Perfectly match the original gearbox, easy to install; 4. Reduction ratios: 13.17:1(overdrive 26%) 5.Motor Gear:11T 6.Package includes: gear*4; 3×6× 2.5 bearing*6; 3×16...

1.Plastic rod ends and brasspivot balls; 2.Links are made of stainless steel, scratch-resistant and wear-resistant; 3.Replace SCX24 stock Y-link, avoid friction with the drive shaft, offer smoother travel; 4.Bent links provide higher clearance when climbing for improved passability; 5.Suit for 24 Rock Crawler Car...

Features: 1.Made of steel,CNC hardened steel structure，sturdy and durable. 2.There are lengths in total, 3 combinations:Type A: for SCX24 Deadbolt AXI90081 ，B17 AXI00004. Type B:for SCX24 C10 AXI00001 AXI00002, JLU,Ford Bronco AXI00006.Type C:for SCX24 Gladiator AXI00005.Size and weight：A: 34-40MM+56-81MM；20GB: 45-58MM+56-81MM；21G C: 45-58MM+69-95MM；23GThe package includes:2*drive...

Features:1.It is formed from aluminum alloy and brass,the surface is anodized, beautiful and durable; 2.It can be modified into a portal on the original axle,and gear transmission by 1:1 without changing the transmission ratio of the original vehicle; 3.Compared with the original vehicle, the...

ROCHOBBY 1:10 Atlas 4x4 Off-Road Truck RS This 1:10 Atlas 4x4 is designed in the form of an off-road truck racer. The car body is moulded with PC plastic, which is light in weight and has a low center of gravity; the nylon roll cage at the...