INJORA LCG Carbon Fiber Chassis Kit Frame Girder for 1/18 RC Crawler TRX4M UpgradeCompatible with: 1/18 TRX4MNot compatible with lay down servos as the distance between the rails is not wide enough.Features: Compatible with TRX4M stock parts and adds many shock mounting points for better...

INJORA MBL32 G2 Waterproof Brushless ESC & 1721 Purple Viper Outrunner Motor for 1/18 TRX4M Ascent-18 Compatibility Notice: Transmission:  Compatible with 1/18 TRX4M, 1/18 Redcat Ascent18 transmissions, not compatible with 370 transmission. Features: The INJORA MBL32 G2, based on the AM32 firmware, is meticulously tailored...

INJORA MBL32 G2 Waterproof Brushless ESC & 2204 Fat Viper Outrunner Motor for 1/18 TRX4M Features: The INJORA MBL32 G2, based on the AM32 firmware, is meticulously tailored for Micro crawlers and is programmable. Smooth and linear at low speeds, powerful and aggressive at...

INJORA MBL32 G2 Waterproof Micro Brushless ESC for 1/24 1/18 RC Crawlers TRX4M Ascent18 SCX24 Programming Tutorial  Compatible with:  INJORA 1721 Purple Viper motors INJORA 2204 Fat Viper motors Features: The INJORA MBL32 G2, based on the AM32 firmware, is meticulously tailored for Micro...

INJORA MBL32-NANO Brushless ESC  & 1621 Green Viper Motor for 1/30 Axial SCX30 Note: Not compatible with the stock SCX30 Radio. A transmitter and receiver with a CH2 port are required Pre-configured and ready to run. No programming required. USB programmer card is not...

INJORA MBL32-NANO Brushless ESC for 1/30 Axial SCX30 Note: Pre-configured and ready to run. No programming required. USB programmer card is not included. For use with INJORA brushless motors only. Damage caused by using other motors is not covered under INJORA warranty. Please use...

INJORA Mud Paw 1.0" M/T Tires (4) (52*19mm) for 1/24 RC crawlers Features: Give your car more realistic look! Classic Mud-Terrain Design: The INJORA Mud Paw tires feature a classic mud-terrain styling reminiscent of the early generations of off-road tires. Directional Tread Pattern: Utilizes...

INJORA Pre-mounted Pin Buggy Tires & Wheels for 1/24 Losi Micro-B Features: INJORA high-traction B1 rubber compound provides superior grip on various surfaces Lightweight one-piece wheels with a scale-inspired design Micro pin tread pattern for optimal off-road control Pre-mounted for easy installation and a...

INJORA Pre-mounted Pin Buggy Tires & Wheels for 1/28 Losi Micro-T Features: INJORA high-traction B1 rubber compound provides superior grip on various surfaces Lightweight one-piece wheels with a scale-inspired design Micro pin tread pattern for optimal off-road control Pre-mounted for easy installation and a...

INJORA Purple Viper 1721 Brushless Motor for 1/24 SCX24 Note: The motor is only compatible with: 1/24 SCX24 You need to cut the ESC tray to make room for installing the brushless kit. Features: Runs more quietly than brushed systems, producing virtually no noise....

INJORA Roverin M30 G2 FOC Sensored Brushless ESC & Motor Combo for 1/18 TRX4M Ascent-18 Brushed(4800KV) What's New in G2?The Roverin M30 G2 features essential hardware upgrades to improve reliability and thermal performance: 1. Enhanced Heat Management: Optimized ESC circuitry to effectively reduce operating...

INJORA 30PCS Sealed Bearing Kit for 1/18 RC Crawler Redcat Ascent-18 Compatible with:1/18 RC Crawler Redcat Ascent-18 Features: Made of stainless steel Precise tolerances Sealed and dustproof design Make your rig roll smoother Contains all the bearings for Ascent-18 Redcat Ascent-18 Crawler Sealed Bearing...

INJORA Sealed Bearing Kit for HPI Venture 18 Upgrade (18)Compatible with: HPI Venture 18Features: Made of stainless steel Precise tolerances Sealed and dustproof design Make your rig roll smoother Contains all the bearings for HPI Venture 18 Bearing Kit Includes: Bearing Kit Includes: (2)...

INJORA 22PCS Steel Sealed Bearing Kit for 1/18 RC Crawler TRX4M Upgrade Parts (TRX4M-03) Suit For: 1/18 Traxxas TRX4MFeatures: Sealed and dustproof design Replace the stock bushings with bearings Make your rig roll smoother Contains all the bearings for the Traxxas TRX-4M Made of...

INJORA Stainless Steel 40.3:1 Low Range Transmission Gear Pinion Set for 1/18 RC Crawler Car TRX4M Upgrade (4M-36)Note: Don't forget to grease the gears!!!Suit For: 1/18 TRX4MFeatures: Reduce the speed by approx 59% CNC machined Made of high quality stainless steel Ultra-low 40.3:1 reduction ratio...

INJORA Stainless Steel CVD Axle Shafts for 1/30 Axial SCX30 Features: Stainless steel construction for improved wear resistance and durability Upgraded front axle CVD design to replace the stock dogbone-style axle shafts Extended axle shaft threads by 1 mm allow the installation of wider...