The Most Mirco size of Easylap Transponder! A.This model with LED inside when power up. B.Compatible with EasyLap & Robitronic Lap Counter system. C.Smaller volume.(H0.88 XW 1.0 XL0.5CM) 50% smaller than Robitronic,with Trans-Blue Case. D.Stable quality, low failure rate. E.Multi Connection to 1:28 RC...

Manual   The QuicRun 1621 Outer Motor pairs perfectly with the QuicRun WP Mini24 ESC, providing optimal performance. Good Linearity at Low Speeds: The motor offers excellent low-speed linearity with minimal vibration amplitude. Precision dynamic balancing of the rotor significantly reduces vibration and performance loss, ensuring a...

Manual OVERVIEW Outer brushless motor The system has high efficiency, less heat, and effectively extends the run time; and the motor runs more quietly and soft. Excellent water resistance and dustproof performance, capable of running in various conditions. Intelligent torque output and speed closed-loop...

INJORA MBL32 G2 Waterproof Micro Brushless ESC for 1/24 1/18 RC Crawlers TRX4M Ascent18 SCX24 Programming Tutorial  Compatible with:  INJORA 1721 Purple Viper motors INJORA 2204 Fat Viper motors Features: The INJORA MBL32 G2, based on the AM32 firmware, is meticulously tailored for Micro...

INJORA Gold Viper 1721 Brushless Motor 2800KV for 1/24 SCX24 Compatibility: ESC: Only compatible with INJORA MBL32 ESC and QuicRun Mini24 ESC. Not compatible with other ESCs! Transmission: Only compatible with stock SCX24 transmission and INJORA metal transmission Chassis: Not compatible with carbon fiber chassis with...

Features:12 Pole hi-torque motor design.Super thin (0.2 mm) stator laminations---lower eddy losses---maximizes efficiency.Japanese NMB --High RPM ABEC5 bearings.Precision balanced rotor, smoothness for best reliability and maximum RPM.CNC machined 6061 T6 billet aluminum heatsink can.Precision engineered for maximum energy conversion.High purity and higher temperature single...

FURITEK high quality XT30 to JST-PH conversion cable is designed to support plug and play for lipo battery and Furitek esc. This high quality conversion cable helps eliminate the need for cutting and soldering cables and connectors.Application: For lipo batteries that have XT30 connectors to...

FURITEK STARTER WITH TX/RX Combo 118 2S Brushless Power System FOR TRX-4M SUPPORT 2S LIPO only Introducing the Furitek STARTER 118 brushless power system for TRX-4M, the system includes the VENOM 1212 3450kv with lighter and smaller size yet very powerful at low speed...

🚀 Furitek PIXI Drift w/ WiFi Module & FAN – Sensored ESC for 1/10 Cars Precision. Power. Miniaturized for Drift. Meet the Furitek PIXI Drift – the world’s most compact sensored ESC with an integrated cooling fan, purpose-built for 1/10 RWD drift cars. Born from the legacy of the SlideTech...

Micro size full metal coreless digital servo,fit for MiNI-Z,1/18,1/24/1/27,1/28 rc cars(DRZ V2,BMR-X,Drift Art2,WLtoys K989/969,Mini-Q,etc.) Operating voltage:4.8-6.0V Operating speed:              Stall torque:    4.8V-0.070sec/60°             4.8V-1.6kgf.cm(22oz-in) 6.0V-0.065sec/60°             6.0V-1.8kgf.cm(25oz-in) Gear material:Copper Horn...

OMG-MT-AURORA-S2 Sensored brushless top motor for 1/27 and 1/28 Mini-Z RC Car Suitable for rc RWD,FWD,etc vehicles. Max Amps:8A Max Voltage (V):<8.4 Resistance(Ω):0.74      No-load Current(A):0.25 Continuous Power(W):80 Poles:2   Max RPM:60000 Length of extend Shaft:10mm Diameter Length(mm):Φ15X25mm Shaft Diameter(mm):Φ2 Weight:17g

93233 Rocket DRIFT SPEC 3500KV sensored brushless motor FEATURES• The max power of the motor is 80 watts, and the power output efficiency is as high as 92%.• Unique senored and sensorless dual compatible mode startup.• Thicken gold PCB circuit board, solder with ESC...

INJORA 180 PRO Brushed 48T Motor with Stainless Steel Pinion for 1/18 RC Crawler TRX4M Upgrade (INM11)Note: While providing more torque, this motor will also increase the speed Not waterproof Suit For: 1/18 Traxxas TRX4MFeatures: Extremely high-strength neodymium magnets Stronger drag brake and torque...

INJORA Coreless Metal Gear High Torque Digital Micro Servo for 1/18 TRX4M (INJS11)(High Voltage)Note: This servo requires a special servo mount and horn! It is only compatible with the INJORA servo mount and horn in this kit! Not waterproof Compatible with: 1/18 RC crawler...

🧭 Introducing the Furitek CRAWLCORE Waterproof Combo for TRX-4M Elevate your TRX-4M to elite performance levels with the all-new Furitek CRAWLCORE Waterproof Combo, featuring the UNITY PRO 3500KV 2-in-1 Brushless System and the upgraded MICRO STELLAR 4M Transmission. Designed for extreme crawling precision, torque, and durability, this combo delivers...

Note: Furitek ESC only support: Komodo 2204 1400kv, Micro Komodo 3450kv, Mini Komodo 2000kv. Don't run motors with high KV like 4100 on 3S