REFLEX RACING RX28 1/28TH SCALE 2WD KIT - GEN 2 - HeliDirect
REFLEX RACING RX28 1/28TH SCALE 2WD KIT - GEN 2 - HeliDirect
REFLEX RACING RX28 1/28TH SCALE 2WD KIT - GEN 2 - HeliDirect
REFLEX RACING RX28 1/28TH SCALE 2WD KIT - GEN 2 - HeliDirect
REFLEX RACING RX28 1/28TH SCALE 2WD KIT - GEN 2 - HeliDirect
REFLEX RACING RX28 1/28TH SCALE 2WD KIT - GEN 2 - HeliDirect
REFLEX RACING RX28 1/28TH SCALE 2WD KIT - GEN 2 - HeliDirect
REFLEX RACING RX28 1/28TH SCALE 2WD KIT - GEN 2 - HeliDirect
REFLEX RACING RX28 1/28TH SCALE 2WD KIT - GEN 2 - HeliDirect
REFLEX RACING RX28 1/28TH SCALE 2WD KIT - GEN 2 - HeliDirect

REFLEX RACING RX28 1/28TH SCALE 2WD KIT - GEN 2

RX28 G2 INSTALLATION/INSTRUCTION MANUAL Description RX28-KITG2 (Double A-ARM Front Suspension) ALL NEW GEN 2 Kits build on the foundation...
SKU: RX28-KITG2
Availability: In Stock
$419.99
$419.99
REFLEX RACING RX28 1/28TH SCALE 2WD KIT - GEN 2 - HeliDirect

REFLEX RACING RX28 1/28TH SCALE 2WD KIT - GEN 2

$419.99

REFLEX RACING RX28 1/28TH SCALE 2WD KIT - GEN 2

$419.99

RX28-KITG2 (Double A-ARM Front Suspension)

ALL NEW GEN 2 Kits build on the foundation of our Super Successful, Super Fast RX28. 

New in the Gen 2 DOUBLE-A-ARM cars is:

  • Updated Molded A-Arms with less slop and dedicated Left/Right Arms
  • Molded U Shaped Side Links for more durability and extra clearance around battery Area
  • Molded Center Pivot for more Durability
  • 30g Stainless Steel Chassis with Hard Coating for more durability, quality and performance vs brass
  • All New Ultra Low CG Motor Mount for increased corner speed, lighter weight and more precise ride height adjustment. Also allows virtually any motor in the industry to be a drop in to the mounting position. Allows gear adjustment from 9T-17T Pinions.
  • Newly Released V2 Differential with thrust bearing and aluminum dust cover compatible spur gear. 
  • Revised Front Bulkhead which now has static 2 degrees of caster and no interference with upper or lower arms.
  • Revised hardware throughout.
  • Reflex Racing Speed Wheels Included

    Dimensions:

    • 98mm Wheelbase
    • 145g-170g weight RTR Depending on body and Electronics
    • 69mm to 78mm Rear Track Width
    • 72mm to 75mm Front Track Width

    Required to Complete this Kit:

    • Body and either front clip or front bumper (note: if using a hardbody, glue the L-shaped side-clips to the ridges just forward of the standard placement, shown in pictures and manual)
    • Wheels and Tires (note: the front track width of the RX28 is wider than that of the MR03W so please use front wheels with 2mm lower offset)
    • Motor
    • ESC
    • Receiver
    • Servo (Please note, the provided servo horn is designed to work with the AGFC A06CLS sized Spline, the Atomic Servo is a little bit of a tight fit but works, and the GL the PN Anima Servos will fit as well)
    • LiPo Battery

    NOTE: When Mounting Hard Plastic bodies, you will need to mount the ridges forward on the side clips.


    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)